使用说明：
    如果想让信号岀的早一点，可调节源码内前两行macd的参数，例如把(9,150,12)改为(15,26,5)。

1：优化了原来macd的柱子和两条线，用红绿色表示，看起来更明显！
2：在绿线没有变红线之前，不要盲目抄底，容易被套！
3：同样，改变源码内macd的参数可使灵敏，但越灵敏失误也会增多！
4：柱子变红，线也变红，同时也出信号，这时进场也不晚！

{最佳启动}

DIF:EMA(CLOSE,9)-EMA(CLOSE,150),NODRAW;

DEA:EMA(DIF,12),NODRAW;

MACD:2*(DIF-DEA),COLORSTICK;

DIK:4*DIF-3*DEA,COLORYELLOW;

DED:=EMA(DIK,1),COLORGREEN;

IF(C>DED,DED,DRAWNULL),COLORRED,LINETHICK3;

IF(DED<=REF(DED,1),DED,DRAWNULL),COLORGREEN,LINETHICK3;

启动点:=MACD<0 AND MACD>REF(MACD ,1) AND REF(MACD ,1)<REF(MACD ,2)

AND REF(MACD ,2)<REF(MACD ,3)

AND REF(MACD ,3)<REF(MACD ,4);

STICKLINE(启动点,8,MACD,2,0),COLORMAGENTA;

分界线:0,COLORFF00FF;

DRAWICON(启动点,20,11);

STICKLINE(MACD>REF(MACD,1) AND MACD>0,0,MACD,1.8,0),COLOR000055;

STICKLINE(MACD>REF(MACD,1) AND MACD>0,0,MACD,1.1,0),COLOR000099;

STICKLINE(MACD>REF(MACD,1) AND MACD>0,0,MACD,0.6,0),COLOR0000BB;

STICKLINE(MACD<=REF(MACD,1) AND MACD>0,0,MACD,1.8,0),COLOR40FF00;

STICKLINE(MACD<=REF(MACD,1) AND MACD>0,0,MACD,1.1,0),COLOR40FF00;

STICKLINE(MACD<=REF(MACD,1) AND MACD>0,0,MACD,0.6,0),COLOR40FF00;

STICKLINE(MACD>REF(MACD,1) AND MACD<0,0,MACD,1.8,0),COLOR000055;

STICKLINE(MACD>REF(MACD,1) AND MACD<0,0,MACD,1.1,0),COLOR000099;

STICKLINE(MACD>REF(MACD,1) AND MACD<0,0,MACD,0.6,0),COLOR0000BB;

STICKLINE(MACD<=REF(MACD,1) AND MACD<0,0,MACD,1.8,0),COLOR40FF00;

STICKLINE(MACD<=REF(MACD,1) AND MACD<0,0,MACD,1.1,0),COLOR40FF00;

STICKLINE(MACD<=REF(MACD,1) AND MACD<0,0,MACD,0.6,0),COLOR40FF00;

{选股公式}

DIF:=EMA(CLOSE,12)-EMA(CLOSE,150);

DEA:=EMA(DIF,9);

MACD:=(DIF-DEA)*2;

启动点:MACD<0 AND MACD>REF(MACD ,1) AND REF(MACD ,1)<REF(MACD ,2)

AND REF(MACD ,2)<REF(MACD ,3)

AND REF(MACD ,3)<REF(MACD ,4);